Anonymous · shared by users
Gatewatch Explorer
What is blocked where. People in many countries run Gatewatch by Exposy or Pulse on their own network and choose to share the result. Here you can see which websites open from which country and network, and where the ones that do not open are stopped.
Loading measurements...
What the results mean
“Blocked” is everything except Opens, Does not exist, Expired certificate and Site misconfigured. Results marked VPN were measured while the user’s VPN was on: they count under the country and network the VPN traffic came out of (a user in Iran on a German VPN counts as Germany via VPN). A site that refuses visitors can be the site’s own choice, so read that result as “not available”, not always “censored”.
- Opens
- The site opened normally.
- DNS poisoned
- The network’s DNS gave a fake address for the name, so the browser never reaches the real site. Other DNS servers give the real one.
- DNS fails
- The network’s DNS gave no answer, while other DNS servers do.
- Address blocked
- The site’s server address does not answer at all (connection times out or is reset).
- Name filtered
- The address answers, but the connection is cut as soon as the site name is mentioned (SNI filtering).
- Intercepted
- Someone in the middle presented a different certificate than the site’s own.
- Page fails
- The secure connection works, but the page itself does not load.
- Site refuses
- The site answered and turned the visitor away (403/451, or “not available in your region”, “turn off your VPN”). This can be the site’s choice, not the network’s.
- DNS and address blocked
- The network gave a fake address, and the real address is cut off too, so even another DNS does not help.
- Does not exist
- The name does not exist anywhere. Not counted as blocked.
- Expired certificate
- The site’s own certificate has expired. Not counted as blocked.
- Site misconfigured
- The site’s own certificate does not match its name. That is the site’s fault, not censorship. Not counted as blocked.
How we measure
- 1The app asks the network’s own DNS for the site and compares it with DNS over HTTPS (Cloudflare, Google).
- 2It tries to connect to the site’s address, then starts a secure connection using the site name.
- 3It loads the page. Any answer means the network let the site through.
- 4The first step that fails, and how, gives the result you see above.
Tests run on the user’s own device and network. The country is where the user was when sharing, not which list of sites they tested. Anyone can send reports, so treat single results with care; a pattern across many networks and days is a strong signal.
Privacy
- Sharing is the user’s choice: once for every test, or one result at a time. Without that consent nothing is sent.
- We store no IP addresses, no device identifiers and no user accounts. A report holds the test day, country, network name, and the result per site.
- The numbers are updated once an hour, with all reports of the past hour together, so the time of a single report is not visible.
- Reports are anonymous: no IP address, no device identifier and no account. On a small network with few users, a published result may be the only one from that network in that hour.
Learn more
Guide and answers to common questions about Gatewatch Explorer
Blocked, or just down?
When a website will not open, there are two very different explanations. It may be down, in which case it fails for everyone, everywhere. Or it may be blocked, in which case it works in other countries and on other networks, but not on yours. The Gatewatch Explorer helps you tell the two apart: it shows, country by country and network by network, which websites opened for the people who tested them and, for those that did not, at which step the connection was stopped.
The results come from people who ran the Gatewatch by Exposy or Pulse app on their own internet connection and chose to share the outcome. That makes the explorer an internet censorship checker based on ordinary user connections, the same ones people browse with every day.
How to check if a website is blocked in your country
The list starts with the most blocked sites. You can open a country directly by adding its two-letter code to the address, for example exposy.net/gatewatch?country=DE. To look up a single website:
- Choose the country in the first menu. Only countries with at least one shared report are listed.
- If you like, narrow it down to your provider with the network menu. Networks are listed by name and AS number, because blocking often differs from one provider to the next.
- Type the domain, for example example.com, into the search box.
- Read the result: the badge shows the share of reports in which the site did not open, the coloured bar shows what happened across those reports, and the last column shows the most recent test day.
How to read the results with care
A site counts as blocked for every outcome except Opens, Does not exist and Expired certificate. Treat the percentage as a summary of the reports received, not as a final verdict on a whole country.
- Check the number of reports. A published result can rest on a single report and anyone can send one, so a pattern across several networks and days carries more weight.
- Compare networks. In many countries each provider applies blocking itself, so a site can be blocked on one network and open on another.
- Look at the date. A site that was blocked last month may be reachable today, or the other way round.
- Site refuses is often the website's own decision, for example a service that is not offered in that country or that turns away VPN users, and not necessarily censorship by the network.
- New reports appear after the next full hour, because the numbers are only published for hours that are complete.
How the apps measure a site
Every result in the explorer comes from the same sequence of steps, run on the sender's own device and network. The first step that fails, and the way it fails, becomes the outcome you see.
- The app asks the network's own DNS for the site and compares the answer with DNS over HTTPS from Cloudflare and Google. A fake address or no answer, where the public services give the real one, is the DNS result.
- It tries to connect to the site's address. An address that never answers, or resets the connection, is the Address blocked result.
- It starts a secure connection that mentions the site name. If the connection is cut at that point, the outcome is Name filtered, and a certificate that is not the site's own is Intercepted.
- It loads the page. Any answer, including an error page, shows that the network let the connection through, and then the question is what the site itself did.
What the explorer cannot tell you
The explorer shows what people measured, not a complete picture. A site that nobody has tested is not listed, and that says nothing about whether it is blocked. The apps test lists of sites that their authors chose, so a surprising absence usually means that nobody has asked about that site yet.
A report also cannot say who applied the block. A national filter, a provider's own filter, a company firewall, a school network or a home router with a content filter can all produce a blocked result, and the report carries only the network name and number, not the reason. When a block shows on a single network, ask whether that network is a home, office or mobile network before you conclude that a country blocks the site. A pattern across several different providers points to the country level.
Finally, the country is where the sender was at the time, not which list they tested. Someone who travelled, or who ran the test over a VPN, can add a result under another country than their own, and that is one more reason to look for agreement between several reports.
What the blocking method means for you
The step at which a site is stopped says a lot about how the block works and what might get around it. Check the law where you are first: in some countries, bypassing blocks or visiting blocked sites can be risky or illegal, and your provider can see the traffic.
- DNS poisoned or DNS fails: the block sits in your provider's DNS. Switching your device or browser to an encrypted DNS service (DNS over HTTPS or DNS over TLS) often helps, unless the network also blocks encrypted DNS.
- Address blocked: the server's IP address cannot be reached from your network. Changing DNS does not help here; only a VPN, a proxy or another route can reach it.
- Name filtered: the network reads the site name in the TLS handshake (SNI) and cuts the connection. A VPN avoids this, and Encrypted Client Hello can hide the name where both the browser and the website support it.
- Intercepted: someone in between presented a different certificate. Do not click through the browser's certificate warning and do not enter passwords over that connection.
- Page fails or Site refuses: the connection itself worked, so the problem lies at the HTTP level or with the website. Try again later or from another network to compare.
Add your own measurements
If your country, provider or website is missing, you can measure it yourself. Gatewatch by Exposy is a free app for Windows and Android that runs the checks on your own network, compares the answers of your network's DNS with several public DNS services, notices when your network intercepts DNS, and tells a national-only internet apart from a full outage. Sharing a result with this explorer is optional, and nothing is sent unless you agree. The Pulse network monitor includes a Gatewatch section with the same option.
Related on Exposy: Internet Insights shows national traffic trends from Cloudflare Radar, where a sudden drop points to an outage or a shutdown rather than a blocked site, and the VPN Effectiveness test checks whether your VPN really hides your IP address, DNS servers and location.
Frequently asked questions
How can I check if a website is blocked in my country?
Open the Gatewatch Explorer, choose your country and type the domain into the search box. If people in your country have tested the site, you see the share of reports in which it was blocked and at which step it was stopped. If it is not listed, run the free Gatewatch by Exposy app on your own connection to test it directly, and share the result if you want others to see it.
How do I know if a website is down or blocked?
A website that is down fails from everywhere, while a blocked website fails only in certain countries or on certain networks. Compare the explorer's results for several countries and providers, or ask someone abroad to open the site. The step that fails also helps: a fake DNS answer or a connection cut as soon as the site name is sent points to blocking, while a server that answers nowhere points to an outage.
Why is a website blocked on one provider but not on another?
In many countries, blocking is carried out by each internet provider with its own equipment and methods. One provider may poison DNS answers, another may filter by site name in the TLS handshake, and a third may not have applied a blocking order yet. That is why the explorer lets you filter by network (ISP), listed by name and AS number, instead of showing only one figure per country.
Can a VPN or a different DNS server unblock a website?
It depends on how the website is blocked. If the block is in your provider's DNS, an encrypted DNS service often works. If the server address or the site name in the TLS handshake is filtered, changing DNS does not help and a VPN or proxy is needed. Before you try, check the law where you are, because bypassing blocks can be risky or illegal in some countries.
Where does the data come from, and is it anonymous?
Every result comes from a person who ran Gatewatch by Exposy or Pulse on their own network and chose to share it. A report includes the test day, the country, the network name and AS number, and the outcome for each site. No IP address, device identifier or account is stored with it, and the public numbers are updated once an hour.
What does a result of 100 percent blocked mean?
It means that in every report received for that site on that selection, the outcome was one of those counted as blocked. It is a strong sign if it rests on many reports from several networks and days, and a weak one if it rests on a single report. Check the number of reports and the last seen date next to it, and look at the verdict bar to see whether the failures all have the same cause.
Is a site that shows Intercepted dangerous to open?
Intercepted means that someone between the sender and the site presented a certificate that is not the site's own. That can be a censorship box, a company or school proxy that inspects traffic, or an attack. Your browser would show a certificate warning in that case. Do not click through the warning, and do not enter passwords or card details over that connection.
Can my own result appear in the explorer without my consent?
No. The apps send nothing unless you choose to share, either for each test or one result at a time. A shared report holds the test day, country, network name and number, and the outcome per site. It does not hold an IP address, device identifier or account, and the public numbers are updated once an hour, so the time of a single report is not visible.
Why is my country or a website not listed?
The explorer only shows what people have shared, so a country, network or website appears once someone there has tested it with Gatewatch or Pulse and shared the result. New reports are published after the next full hour. You can fill the gap yourself by running the free Gatewatch app on your own connection and choosing to share the result.