Skip to content

IPv6 Test: Does Your Connection Have IPv6?

IPv4 and IPv6 reachability, which one your browser prefers, speed of each and who owns each address

Checking IPv4 and IPv6

Checking IPv4 and IPv6…

Asking address services over IPv4 only and over IPv6 only which address they see.

IPv4 connectivity

Checking

IPv6 connectivity

Checking

Preference on dual-stack

Checking

Latency

Checking

Rough: the time includes the services' own response time and, for the first request, setting up the connection.

Who owns each address

Checking

Address type (IPv6)

Checking

Measured from this browser only. Nothing about you is stored.

Learn more

Guide and answers to common questions about IPv6 Test

What IPv6 is

Every device on the internet needs an address so that answers can find their way back. The old system, IPv4, uses addresses like 203.0.113.7 and has room for about 4.3 billion of them. IPv6 is its successor: addresses like 2001:db8:1234:5678:abcd:ef01:2345:6789, 128 bits long instead of 32, so many that running out is not a realistic worry. The two systems run side by side, and a connection can have one or both.

For you, IPv6 changes little when you browse: pages, video and apps look the same. It matters in the background, for how well the network scales, and for privacy, because an IPv6 address is a second address that websites see and that a VPN has to cover as well.

Why internet providers roll out IPv6

The central pool of free IPv4 blocks ran out in 2011, and providers since have had to stretch the addresses they own. The usual way is carrier-grade NAT (CGNAT): many customers share one public IPv4 address, which makes things like hosting a game, port forwarding or telling one customer from another harder, and costs the provider equipment. IPv6 gives every customer a block of addresses of their own, without sharing, so providers, mobile carriers in particular, turn it on and let the traffic to IPv6-capable sites skip the shared IPv4 address.

Many large sites and services answer over IPv6 as well as IPv4. Some providers still offer IPv6 only on some plans or in some regions, which is why two people on the same street can get different results here.

What this test checks

The test runs in your browser and measures six things. Every row shows one of: OK, Not available, Could not determine (the check ran but cannot tell, with the reason) or Not tested (it needs something an earlier check did not find).

  • IPv4 connectivity: your browser asks a public address service that is reachable over IPv4 only which address it sees. An answer proves that IPv4 works and shows the address.
  • IPv6 connectivity: the same question to a service that is reachable over IPv6 only. If it answers, you have working IPv6; if it does not, the row says so without calling it an error.
  • Preference on dual-stack: a service that answers over either version is asked, and the address it saw is compared with your two addresses. It needs both versions to work, otherwise the row says it cannot be tested.
  • Latency: three small requests over each version, alternating, with caching off. The median of each is shown with the difference. It is a rough figure: it includes the services' own response time, and the first request includes setting up the connection.
  • Who owns each address: both addresses are looked up in a geolocation database through our server, which shows the provider, network number (ASN) and country, and whether the two belong to the same network. The lookup is approximate and nothing is stored.
  • Address type: what can be read from the IPv6 address itself, and its /64 prefix.

Dual-stack and how your browser chooses

A connection that has both IPv4 and IPv6 is called dual-stack. When a site is reachable over both, your device has to pick one. Browsers and operating systems use a method called Happy Eyeballs: look up both kinds of address, try IPv6 first, and if it does not connect within a fraction of a second, start IPv4 as well and keep whichever connects first. That keeps a broken IPv6 route from making a page slow.

So on a dual-stack connection, IPv6 normally wins. If the preference row shows IPv4 although IPv6 works, the system or a VPN client is set to prefer IPv4, or the IPv6 route was slower or failed for that request. The row describes one request to one service; other sites can differ.

What "IPv4 only" means for you

It means your connection has no IPv6, or none that reached the test. That is not a fault and nothing is wrong with your security. Every website still works, because sites that have IPv6 also keep IPv4. You are not missing a feature you would notice. The only differences are that you stay behind the provider's IPv4 sharing, if it uses CGNAT, and that your provider may roll IPv6 out later without you doing anything.

One caveat: if the IPv6 services were blocked by a firewall, DNS filter or ad blocker on your side, the result looks the same as having no IPv6. The test reports what answered, not why something did not.

IPv6 and VPNs: the IPv6 leak

A VPN sends your traffic through a tunnel to its server, so that websites see the VPN's address instead of yours. Many VPNs only tunnel IPv4. If your connection also has IPv6, a site that supports it can get your IPv6 traffic straight from your device, around the tunnel, and sees your real provider and a prefix that identifies your home. This is an IPv6 leak.

This test shows it as a difference: IPv4 belongs to the VPN company or a hosting provider, IPv6 to your own internet provider. The verdict then says the two belong to different networks. To confirm it, run the VPN Effectiveness Test with the VPN off and on, and the IP Leak Test, which shows both addresses with their provider. A good VPN either carries IPv6 too (the two addresses then belong to the same network) or blocks IPv6 while connected; many VPN apps have a setting named like "IPv6 leak protection" or "block IPv6".

Different networks without a VPN is not necessarily a leak. A few providers use separate network numbers for IPv4 and IPv6, and IPv6 tunnel services give you an address that belongs to the tunnel company. The test cannot tell whether you use a VPN, only what it measured.

Privacy extensions and the /64 prefix

An IPv6 address has two halves. The first 64 bits are the prefix, given out by your provider to your line or router, so every device at home shares it. The last 64 bits name the device. Early IPv6 built that part from the network card's MAC address, which would make a device recognizable everywhere. Modern systems use privacy extensions instead (RFC 4941): they make up a random device part and replace it from time to time for outgoing connections.

From outside, a temporary address looks like any other, so this test does not guess. The one exception is a device part with ff:fe in its middle, which is the signature of a MAC-based address; the test points that out. Note that privacy extensions only change the device half. The prefix stays, and websites can use it to recognize your household for as long as your provider keeps it, which is why the test shows it. Providers differ in how often a prefix changes: some never, some at a reconnect.

How to turn IPv6 off if your VPN cannot carry it

Check first whether the VPN app has an IPv6 setting; that is the cleaner fix. If it has none and the test shows a leak, you can turn IPv6 off on your device. Browsing keeps working over IPv4, and you can switch it back on later. After each change, reload this page: the IPv6 row should say Not available.

  • Windows: open Settings, Network & internet, Advanced network settings, More network adapter options. Right-click your Wi-Fi or Ethernet adapter, choose Properties, untick "Internet Protocol Version 6 (TCP/IPv6)" and confirm. Do this for each adapter you use. Microsoft recommends DisabledComponents 0x20 (prefer IPv4) instead.
  • macOS: System Settings, Network, pick your Wi-Fi or Ethernet service, Details, TCP/IP, set "Configure IPv6" to Off. In Terminal, "networksetup -setv6off Wi-Fi" does the same, and "networksetup -setv6automatic Wi-Fi" undoes it.
  • Linux: with NetworkManager, "nmcli connection modify <connection name> ipv6.method disabled" and reconnect. To switch it off for the whole system until the next reboot, "sudo sysctl -w net.ipv6.conf.all.disable_ipv6=1".
  • iPhone and iPad: there is no switch for IPv6. Use a VPN app that covers or blocks IPv6, or turn IPv6 off in your router for your Wi-Fi.
  • Android: no switch for Wi-Fi either; the same advice applies. On mobile data, some phones let you set the APN protocol to IPv4 only, which depends on the carrier and the phone.
  • Router: many routers have an IPv6 setting for the whole home network. Turning it off there covers every device, phones included.

What this test cannot tell you

It shows that small requests get through over each version. It does not show whether large packets do: broken path MTU handling can make IPv6 pages stall although tiny requests work. It does not tell whether your DNS queries travel over IPv6 or leak; use the DNS Leak Test for that. It cannot say whether you use a VPN, whether an address is temporary, or why a service did not answer. The latency figure is a rough comparison from three requests, and the provider and country come from a geolocation database that can be wrong or out of date.

Frequently asked questions

Do I need IPv6?

No. Every website you can reach over IPv6 can also be reached over IPv4, and an IPv4-only connection works for everything you do online today. IPv6 helps providers avoid sharing addresses between customers and may matter more in the future, but there is nothing you must do about its absence.

Why does my IPv6 provider differ from my IPv4 provider?

Without a VPN, usually because your provider uses separate network numbers (ASNs) for the two versions, or because the geolocation database names them differently. With a VPN, the common reason is that the VPN carries IPv4 only: IPv4 shows the VPN, IPv6 shows your home provider, which is an IPv6 leak. Run the VPN Effectiveness Test and IP Leak Test to tell the cases apart.

Is IPv6 less private than IPv4?

It is different. On IPv4 behind a shared address, many customers look the same to a website. An IPv6 address, or at least its /64 prefix, tends to belong to one line or household, so it can identify you more precisely. Privacy extensions hide the device part by changing it, but not the prefix. A VPN that handles IPv6 properly hides both versions.

Why is IPv6 faster or slower than IPv4 here?

The test times three small requests over each version to one service, so it mixes the route, the service's own response time and connection setup. A difference of a few milliseconds is noise. A larger one can be real: IPv6 sometimes takes a shorter path past a shared IPv4 gateway, and sometimes a longer one because the provider's IPv6 routing is less tuned. Run the test again to see whether it holds.

What is a /64?

It means the first 64 bits of an IPv6 address. That part is the network prefix, and the remaining 64 bits are the device. A /64 is the size of one local network, such as your home Wi-Fi, and it holds an enormous number of addresses. Providers usually give a home connection a block larger than a /64 and your router hands out /64s from it.

Why does the test say it cannot test the preference?

The preference is the choice between two versions, so it needs both to work. If only IPv4 answers, the dual-stack service can only ever see IPv4, which tells nothing about the choice.

Is it a problem that my IPv6 address is not temporary?

The test cannot see this from outside, so it does not say. If the middle of the last 64 bits contains ff:fe, the address is built from the network card's MAC address and stays the same everywhere, which is worse for privacy. Most current systems use temporary addresses for outgoing connections by default, but that depends on the system and its settings.

The test says "Could not determine". What now?

It means the check could not run or could not tell, and it says why. If no address service answered at all, look for an ad blocker, DNS filter, firewall or captive portal, switch them off for this page and run the test again. If only the provider lookup failed, wait a minute and retry, as geolocation services limit how often they answer.

Does turning IPv6 off make my connection slower or less safe?

Not for browsing: the sites that have IPv6 also have IPv4, so your devices use IPv4 for them. It is a workaround for a VPN that does not cover IPv6, and you can turn it on again when you switch to a VPN that does. Your router's IPv4 protection is not affected.